L
LUMOSHIP
DXFTrace
←
Workspace
L
Account
Sign in
D
DXFTrace
DXF layers → coordinate tables — pick the layers, set 0,0 on a snap point, export for the model
v0.1
units: —
Reset
Export
1
Load DXF
2
Layers & origin
3
Table
DXF file
📏
Drop a DXF file here
or click to browse — ASCII DXF (AutoCAD R12 and newer). The file never leaves your browser.
What to read
Entity types
LINE
POLYLINE / LWPOLYLINE
CIRCLE
ARC
POINT
Blocks
Expand block references (INSERT)
Blocks are placed with their insertion point, scale and rotation. Off → block geometry is left out and reported.
Duplicate parallel lines
Keep one line per pair
units apart
A plate drawn as two lines becomes one. Direction is measured by angle, so the tolerance means the same in a millimetre and in a metre drawing.
Curve tessellation
segments per full circle (polyline bulges)
Read the drawing
Layers & origin →
What the file contains
Layers
—
in the drawing
Segments
—
lines + polyline edges
Curves
—
circles + arcs
Points
—
POINT entities
Layers
All
None
Drawing — click a snap point to read or set 0,0
+
−
Fit
SNAP
Origin: 0, 0
Use UCS origin
Raw 0,0
Point
—
— click a snap point —
Copy X,Y
Set as 0,0
Zoom: 100%
Cursor: —
Entities: —
Snap pts: —
← File
Table →
Layers in the table
All
None
Table
Format
CSV
TSV
Excel (tab, .txt)
JSON
Columns
layer
type
x1
y1
z1
x2
y2
z2
length
cx, cy, r, a1, a2
source (block)
Origin X (drawing units)
Origin Y
Scale (×)
1 — keep drawing units
0.001 — mm to m
1000 — m to mm
25.4 — inch to mm
custom…
Decimals
0
1
2
3
4
Z
write one Z value
One file per layer
split into a .zip
Download
Copy to clipboard
—
Preview
Pick at least one layer.
← Layers & origin